MU10 Liquid Ultrasonic Water Level Sensor
MU10 Liquid Ultrasonic Water Level Sensor Product characteristics
Characteristics
Full range temperature compensation, accurate measurement
With anti-interference intelligent identification and error correction function
Suitable for batch networking and multi-point joint testing
Suitable for the outdoor environment, can be customized up to IP68 waterproof
Suitable for water level, liquid level, distance measurement
Suitable for various measurements such as reservoir water level, container level, aerial positioning, oil product supervision, etc.
Suitable for petroleum, mining, agriculture, food industry, paper industry, power plant, water plant, pharmaceutical factory, printing and dyeing industry
Technical data
|
Measure range |
5m, 10m, 15m(Optional within 15m) |
|
Non-detection zone |
≤300~800mm (Due to different sensor ranges and configuration) |
|
Accuracy |
±0.5%F.S, ±0.25%F.S customizable |
|
Full beam angle |
15°, 12°, 9°(Due to different sensor) |
|
Output signal |
4-20mA three wires, RS485 RISEN-PC agreement. Optional 4-20mA two wires, four wires. 0-5V, 1-5V RS485 Modbus-RTU agreement. 0-10V,1-10V, RS232 customizable |
|
Power supply |
DC24V, Optional DC12V, or customize |
|
Working temperature |
-10~50 ℃ |
|
Working humidity |
≤80％RH No condensation |
|
IP Class |
IP66 (IP68 customizable) |
|
Wiring |
Waterproof connector with 1-meter cable(Cable length customizable) |
|
Installation |
Screw-in installation, Thread size M68×2.0mm or Coil clamping installation, Standard one spiral ring, hole size Φ70mm |
|
Application environment |
Atmospheric pressure, non-explosion-proof, non-corrosive environment(Intrinsically safe explosion-proof version customizable) |
Wring definition
Dimensions: in mm
