HOME ꄲ Pressure Sensors ꄲ Pressure Transimitter ꄲ MPT19 High Temperature Transmitter

MPT19 High Temperature Transmitter

The MPT19 pressure transducer can instead ordinary pressure sensors work in a high-temperature environment not over 85ºC, test high-temperature gases and liquid that not over 200ºC directly.

MPT19 High-Temperature Transmitter Product Description

MPT19 High-temperature pressure transmitter chooses high-temperature pressure sensor as a signal measuring element, The measured medium of pressure is passed on to transmitter by heat dissipation structure, the high accuracy signal processing circuit is located in the stainless steel casing, which can convert the sensor output signal into a standard type. The product passes the strict test from components, semi-finished to finished, with good stability performance, when it is used in a high-temperature medium, it can work for long-term stability.

Features

Adopting the 316L SS isolation diaphragm structure

High-temperature-resistant imported chip

Applicable for wide temperature range

Strong anti-interference, good stability

Direct contact with the measurement medium to improve pressure response frequency

Specification

Pressure range	-0.1...0~35kPa...100MPa
Pressure type	G/A/S
Accuracy	±0.5%FS standard ±0.25%FS ±0.1%FS OEM
Output	two-wire	three-wire
	4-20mA	1-5V/0-5V	0.5~4.5V	0~10V
Power supply	12-36V	12V/24V	5V	12V/24V
Compensated Temp. range	-10～70℃
Operating temp. range	-20～85℃
Medium temp.range	0-200℃
Temp. Coefficient of zero	±1.5%FS(Max.)
Temp. Coefficient of span	±1.5%FS(Max.)
Overpressure	150%FS
Mechanical vibration	20g（20-5000HZ)
Impact	100g（11ms）
Long-term stability	±0.2%FS/year
Insulation	100MΩ，250VDC
Protection class	IP65
Pressure interface	M20*1.5，G1/2，G1/4, NPT1/2, etc.(OEM can be optional)
Electrical interface	Cable connection, DIN43650
Medium compatible	Compatible with stainless steel of all kinds of liquid or gas
Explosion-proof	ExiaⅡCT6
Material	Stainless steel